Parking Sensors NOT WORKING… TRY THIS 1ST
To know which sensor doesn’t work, insert the key into ignition and switch to position 2 an put the car into reverse (without the engine running). step out of the car and go to the parking sensors and touch each one individually and see which one is «sparkling» less than the other ones. You may have 1 or 2 or who knows maybe all (in which case you either have a wiring problem because you can’t know which sensor is bad or they’re all bad and need replacing). Its good to take them out from time to time (twice a year would be perfect) and clean with WD-40 or any other spray which doesn’t leave residues
For more information on WD-40 go to https://wd40.co.uk/
Also see below a check list.
Check for Obstructions: Make sure there are no dirt, snow, or debris covering the sensors. Clean them gently with a soft cloth.
Inspect the Wiring: Look for any visible damage to the wiring or connectors associated with the parking sensors, especially if you’ve been working on or around that area of your vehicle.
Test the System: Start your vehicle and perform a test. Put it in reverse (if applicable) and see if you hear the sensors activating or see any lights indicating they are functioning.
Check the Fuse: Consult your owner’s manual for the location of the fuse for the parking sensors and check if it has blown. If it is, replace it.
Look for Error Messages: If your vehicle has a display screen, check for any error messages related to the parking sensors.
Consult the Manual: Refer to your vehicle’s owner’s manual for specific troubleshooting steps related to your model
Thanks for viewing
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG £££ €€€ $$$
Also click the link below for my Car Lovers T-shirts & Accessories
http://tee.pub/lic/HD11nn0RQaQ
Смотреть в источнике
13 комментариев
There's also a parking sensor module for some reason when i unplug my reverse light bulb the sensor's start working very strange and i wish it was the other way round as i have an mot coming up soon.
Can someone please help me. My sensors are working intermittently. One moment they will act normal then the next time they will been continuously then another time they will do the close rapid beeping. Now all of this will happen when I’m not near any thing
A video to show a "fix" that dont work!!!!!
How brilliant is that!!
Took some thinking that did!!!
Amazing, worked directly after the first try. Thank you for saving me some money!
Not working on mine. Pitty…
Wow it worked
Worked on first attempt clio 2015! Thanks mate
My vauxhall mokka does not beep at all and says need service. I would ideally want to avoid goong to vauxhall as i know thats going to cost a lot more than necessary…. any ideas?
If you guys want more efficiency and long time take wd40 waterproof
WHY does it work though???
2014 Mini — five minutes — sorted. Thanks JFK!!!!
Depending on what vehicle you have, you don't have to take off the bumper. They just clip into those little holes. So if you can gain access to the back side. You can swap them. If the cleaning doesn't work for you.
why wd40?